Hilti

Plano,  TX 
United States
http://www.hilti.com
  • Booth: 852, 652

Hilti is a world-leading manufacturer and supplier of quality, innovative and specialized tools and fastening systems for the professional user. With more than 1,350 highly trained Hilti account managers and engineers throughout North America and an additional 1,100 Hilti employees nationwide, Hilti expertise covers the areas of powder actuated fastening, drilling and demolition, diamond coring and cutting, measuring, firestopping, adhesive and mechanical anchoring, and strut and hanger systems.


 Press Releases

  • Plano, Texas – Jan. 31, 2018 —Keeping the jobsite clean, maintaining a constant pressurized water supply, and disposing of slurry are time consuming.  In fact, it’s estimated that professionals spend almost an hour per day suppling water and cleaning slurry while diamond coring.  With the introduction of the DD-WMS 100 Water Management System these tasks become a thing of the past.

    Large wheels and convenient handle make the DD-WMS 100 easy to transport and move around the jobsite.  Just fill the water tank and be ready to start coring when you arrive on the jobsite.  Water is recycled up to seven times inside the tank, which is equivalent to about 30 gallons of continuous water supply. During coring, slurry is captured in the filter bag.  Once the bag is full, it’s extremely easy to remove the disposable filter bag. 

    You get a full day of water autonomy from four gallons of water thanks to the recycling mode, which means you can drill for a full day on a typical jobsite with just one load of water, and the slurry is taken care of while you drill.

    The DD-WMS 100 is OSHA 1926.1153 Table 1 compliant and suitable for all wet diamond applications.

    Diamond drilling has never been so easy.

    The Hilti DD-WMS 100 water management system has three working modes

    Supply and Recycle mode

    The unique multi-layer filer bags of the DD-WMS 100 are especially designed for collecting slurry, which allows cleaner water to pass through the system.  This means the water in the tank can be re-used for your diamond drilling applications up to seven times, giving you a constant pressurized water supply to get the job done.  Virtually all water and slurry are captured at the point of drilling, meaning there’s no mess to clean-up afterwards.

    Water supply mode

    The DD-WMS 100 can be switched to water supply mode whereby the water tank provides a steady supply of pressurized water for your diamond drilling applications.  Perfect for remote site locations where a main pressurized water supply may not be accessible.

    Vacuum cleaning mode
    We know there’s water and slurry during other applications, so you can switch the DD-WMS 100 to vacuum mode and its powerful suction will quickly take care of the final cleaning.

    The DD-WMS 100 is designed to work with will all Hilti diamond drilling rigs including the DD EC-1, DD 110-W, DD 120, DD 150-U, DD 160, DD 250, DD 350 and DD 500.  Whether you require a hand-held or rig-based drill, or need light or heavy-duty drilling, when these core drills are combined with the DD-WMS 100, you should expect to see increased productivity and a cleaner jobsite.

    The Hilti DD-WMS 100 Water Management System as well as all Hilti diamond core drills are backed by Hilti Tool Warranty 20/2/1 — 20 years of repair or replacement of defective parts; 2 years no cost repair including wear and tear; and a guaranteed 1-day turn-around on repairs* 

    For more information on the DD-WMS 100 Water Management System or Hilti core drills, please contact Hilti Customer Service. From the U.S., call Hilti, Inc., at 1-800-879-8000 or visit www.hilti.com; from Canada, call Hilti (Canada) Corporation at 1-800-363-4458 or visit www.hilti.ca.

    *Some limitations apply.  Contact Hilti for details.

    About Hilti, Inc.

    Hilti is a world-leading manufacturer and supplier of quality, innovative and specialized tools and fastening systems for the professional user. With more than 1,700 highly trained Hilti account managers and engineers throughout North America and an additional 1,300 Hilti employees nationwide, Hilti expertise covers the areas of powder actuated fastening, drilling and demolition, cordless, diamond coring and cutting, measuring, firestopping, screw fastening, adhesive and mechanical anchoring, and strut and hanger systems.

  • Plano, Texas – Sept. 18, 2018 – Hilti is taking the guess work out of mechanical anchor installation with the new Hilti cordless impact wrench SIW 6AT-A22 and the adaptive torque module SI AT-A22. The Adaptive Torque (AT) system enables mechanical SafeSet installation, for most Hilti Kwik Bolt TZ and Kwik Bolt 3 anchors, to be performed productively, and with the correct torque.

    The SIW 6AT-A22, combined with the SI AT module, is the only ICC-ES approved impact wrench system that allows for fast mechanical anchor and proper installation torque of mechanical stud anchors This system avoids over- and under-torqueing anchors. Simply point the module’s barcode reader at the box of Hilti Kwik Bolt anchors you’re installing, then pull the trigger to set the anchor. The module controls the tool and provides immediate feedback, letting you know the anchor is torqued correctly and documents installation for easier quality assurance. Get free tool calibrations with Hilti Fleet Management.

    Both the SIW 6AT-A22 and the SI AT-A22 are backed by Hilti’s 20/2/1 year warranty – 20 years of repair or replacement of defective parts; 2 years no cost repair including wear and tear; and a guaranteed 1-day turn-around on repairs* – so you can be sure it will be ready to go to work when you are.

    For more information, please contact Hilti Customer Service. From the U.S., call Hilti, Inc., at 1-800-879-8000 or visit www.hilti.com; from Canada, call Hilti (Canada) Corporation at 1-800-363-4458 or visit www.hilti.ca.

    *Some limitations apply.  Contact Hilti for details.

    About Hilti.

    Hilti is a world-leading manufacturer and supplier of quality, innovative and specialized tools and fastening systems for the professional user. With more than 2,000 highly trained Hilti account managers and engineers throughout North America and an additional 1,200 Hilti employees nationwide, Hilti expertise covers the areas of powder actuated fastening, drilling and demolition, cordless, diamond coring and cutting, measuring, firestopping, screw fastening, adhesive and mechanical anchoring, and strut and hanger systems.

  • Plano, Texas – Sept. 18, 2018 – The new Hilti cordless vacuum cleaner VC 75-1-A22 is unplugging the competition. As the industry’s first cordless vacuum to meet stringent silica dust regulations, the VC 75-1-A22 leads the industry with double the suction power of vacuums in its size class.

    With its filter cleaning mechanism, the VC 75-1-A22 provides an OSHA 1926.1153 Table 1 compliant solution for cleaning silica as well as drilling holes in concrete or masonry when paired with Hilti’s new DRS-D shroud and TE-C(X) bits.

    With two times the suction power of vacuums in its size class at 75 cfm in full power mode, and twice the run time in Eco mode, the VC 75-1-A22 is powered by Hilti’s robust 22V Li-Ion battery and includes a HEPA filter and fleece pre-filter bag for cleaning. It also has a blower function for blowing debris.

    The VC 75-1-A22 is backed by Hilti’s 20/2/1 year warranty – 20 years of repair or replacement of defective parts; 2 years no cost repair including wear and tear; and a guaranteed 1-day turn-around on repairs* – so you can be sure it will be ready to go to work when you are.

    For more information, please contact Hilti Customer Service. From the U.S., call Hilti, Inc., at 1-800-879-8000 or visit www.hilti.com; from Canada, call Hilti (Canada) Corporation at 1-800-363-4458 or visit www.hilti.ca.

    *Some limitations apply.  Contact Hilti for details.

    About Hilti

    Hilti is a world-leading manufacturer and supplier of quality, innovative and specialized tools and fastening systems for the professional user. With more than 2,000 highly trained Hilti account managers and engineers throughout North America and an additional 1,200 Hilti employees nationwide, Hilti expertise covers the areas of powder actuated fastening, drilling and demolition, cordless, diamond coring and cutting, measuring, firestopping, screw fastening, adhesive and mechanical anchoring, and strut and hanger systems.

  • Plano, Texas – Sept. 18, 2018 – When it comes to drilling in concrete for anchors, the new Hilti cordless rotary hammer drill TE 6-A22 delivers unmatched speed compared to any corded or cordless rotary hammer drill in its class in a size, weight and design that is the basis of the legend.  

    Customers have asked for more work per charge and the B22/5.2 CPC Li-Ion industrial class battery gives them exactly what they want.  And, when you want to lighten the load, the B22/3.0 CPC Li-Ion Advanced compact class battery is designed for weight savings, especially when working overhead.

    The TE 6-A22 includes a chiseling feature for light duty corrective chipping. And adding the TE DRS 6-A T1 Dust Removal System (DRS) provides an OSHA 1926.1153 Table 1 compliant solution for dust control when drilling into concrete. Hilti TE 6-A22 delivers versatility for best-in-class performance, safety, and productivity.

    The TE 6-A22 cordless rotary hammer drill is backed by Hilti’s 20/2/1 year warranty – 20 years of repair or replacement of defective parts; 2 years no cost repair including wear and tear; and a guaranteed 1-day turn-around on repairs* – so you can be sure it will be ready to go to work when you are.

    For more information on Hilti TE 6-A22 please contact Hilti Customer Service. From the U.S., call Hilti, Inc., at 1-800-879-8000 or visit www.hilti.com; from Canada, call Hilti (Canada) Corporation at 1-800-363-4458 or visit www.hilti.ca.

    *Some limitations apply.  Contact Hilti for details.

    About Hilti

    Hilti is a world-leading manufacturer and supplier of quality, innovative and specialized tools and fastening systems for the professional user. With more than 1,400 highly trained Hilti account managers and engineers throughout North America and an additional 2,200 Hilti employees nationwide, Hilti expertise covers the areas of powder actuated fastening, drilling and demolition, cordless, diamond coring and cutting, measuring, firestopping, screw fastening, adhesive and mechanical anchoring, and strut and hanger systems.

  • Plano, Texas –Sept. 18, 2018  – Hilti delivers a one-two punch to the competition with the new cordless reciprocating saw SR 6-A22 and ultimate wood metal reciprocating saw blade SRB WDX.

    Designed for speed, the SR 6-A22 is the fastest cutting reciprocating saw in its class, offering the most work per charge and best performance in materials that vibrate.

    The SR 6-A22 provides optimal efficiency with a new brushless motor, newly designed front and rear grips, cylindrical chuck design, and a front LED light to illuminate the cutting area. An ergonomic keyless blade clamp makes quick work of blade changes, and the option to work with a Hilti dust removal system means clean-up is a breeze.

    Metal-embedded wood has met its match with Hilti’s new ultimate wood metal reciprocating saw blade SRB WDX. The WDX blades have the ultimate strength and lifetime for the most demanding wood cutting applications on the jobsite. WDX blades make fast and straight cuts thanks to their aggressive tooth pattern and thick, tall profile. Available in 6 TPI for common wood and metal applications, and 10 TPI for applications with higher content of metal.

    As always, the tool is offered thorough Hilti Fleet Management and our 20/2/1 year warranty – 20 years of repair or replacement of defective parts; 2 years no cost repair including wear and tear; and a guaranteed 1-day turn-around on repairs* – so you can be sure the SR 6-A22 will be ready to go to work when you are.

    For more information, please contact Hilti Customer Service. From the U.S., call Hilti, Inc., at 1-800-879-8000 or visit www.hilti.com; from Canada, call Hilti (Canada) Corporation at 1-800-363-4458 or visit www.hilti.ca.

    *Some limitations apply.  Contact Hilti for details.

    About Hilti.

    Hilti is a world-leading manufacturer and supplier of quality, innovative and specialized tools and fastening systems for the professional user. With more than 2,000 highly trained Hilti account managers and engineers throughout North America and an additional 1,200 Hilti employees nationwide, Hilti expertise covers the areas of powder actuated fastening, drilling and demolition, cordless, diamond coring and cutting, measuring, firestopping, screw fastening, adhesive and mechanical anchoring, and strut and hanger systems.


 Show Stoppers

  • Kwik Cast Multi-Thread Anchors & Setting Tool
    Color-coded multi-thread cast-in anchors designed to help solve common problems like knock-over and concrete intrusion....

  • We designed our best-in-class Hilti Cast-in anchor KCM-WF with one goal in mind: to make every problem associated with pre-cast anchoring a thing of the past. The KCM-WF features a versatile, multi-thread design to accommodate a variety of rod diameters, a reliable attachment system to make sure the head stays in place and right where you put it when the concrete starts flowing and a tough foam exterior that shrugs off flowing concrete, keeping it out of the threads. It comes in a variety of body and foam color options to color code and easily identify specific runs, helping you avoid costly mistakes and saving hours of time, effort and expense on the jobsite. Combine this with our back-saving KCS-WF-ST setting tool means you can set the KCM-WF anchor quickly and easily from a standing position or when reaching through rebar.
  • Water Management System
    Industry's first self-contained system that supplies water and cleans-up slurry, improving productivity up to 40%...

  • With the DD-WMS 100 you can spend less time managing water supply, slurry and dust removal saving you hours of unproductive time. Water is recycled up to 7 times providing water autonomy (30 gallons) for up to an entire day. During coring, slurry is captured in the filter bag making slurry disposal very easy. The WMS 100 sets the new standard in diamond coring. You no longer have to worry about slurry today or silica dust tomorrow when using the WMS 100.
  • 22V Cordless Copper and Aluminum Cutter
    Best-in-class cutting performance: Up to 2" O.D. Copper & Aluminum conductors....

  • The new Hilti NCT 53-A22 cordless CU/AL cutter offers the ability to cut copper and aluminum conductor up to 2” in outside diameter, in a lightweight tool. The inline design allows users to reach into applications that larger 12 ton tools struggle to fit into. The head swivels 350 degrees to provide the access and maneuverability needed to get the job done. The NCT 53-A22 CU/AL cordless cutter is part of the growing Hilti 22v cordless platform and covered under the industry leading 20-2-1 warranty.
  • 22V Cordless Vacuum Cleaner
    Industry's first OSHA 1926.1153 Table-1 compliant 22V cordless vacuum combines power (75 CFM) with portability....

  • Hilti’s VC 75-1-A22 is leading the industry with double the suction power of vacuums in its size class at 75 cfm in full power mode, and twice the run time in Eco mode. This cordless vacuum runs on the most powerful 22V Li-Ion battery offered by Hilti and includes a HEPA filter and fleece pre-filter bag for cleaning. It is also the industry’s first cordless vacuum to meet new stringent government regulations regarding silica dust in the United States. The VC 75-1-A22, with its filter cleaning mechanism, provides an OSHA 1926.1153 Table 1 compliant solution for drilling holes in concrete or masonry when paired with Hilti’s new DRS-D shroud and TE-C(X) bits. Utilize Hilti ON!Track asset management to keep track of your OSHA documentation and compliance.
  • Cordless Impact Wrench & Adaptive Torque Module
    Increase productivity of Hilti KB(-TZ) anchors installed right according to ICC-ESR with Hilti SIW 6AT-A22...

  • With the introduction of the SIW 6AT-A22 and the SI AT-A22 module, Hilti is expanding the SafeSet concept to mechanical anchors. The Adaptive Torque (AT) system is designed to help you install the Kwik Bolt TZ and Kwik Bolt 3 anchors more productively. The SIW 6AT-A22, combined with the SI AT module, allows for faster mechanical anchor installations than those installed with a cordless impact wrench alone. This system helps avoid over and under torquing anchors. Simply point the module’s barcode reader at the box of Hilti anchors you’re installing, and pull the trigger. The module controls the tool and provides immediate feedback, letting you know the anchor is installed correctly and documents installation for easier quality assurance. Get free tool calibrations with Hilti Fleet Management.
  • 22V Cordless Universal Cutter and Crimper Tool
    Best-in-class versatility: One tool, multiple jaws - for both cutting & crimping applications....

  • The Hilti NUN 54-A22 universal cutting and crimping tool provides extreme flexibility for users who want to use one tool for multiple applications. This tool can be utilized with several different jaws to cut a variety of conductors (up to 1” in O.D.) and crimp copper (up to 600KCMIL) and aluminum conductor (up to 350 KCMIL). When utilized with the ACSR Jaw, it can cut steel reinforced conductor and guy wire commonly found in power and utility applications. The Hilti NUN 54-A22 universal cutting and crimping tool is backed by the industry leading 20-2-1 warranty.
  • Flush Anchor HDI-P TZ & Setting Tool
    Best-in-class flush anchor for shallow embedment, cracked concrete, and seismic applications with time-saving auto-setting tool...

  • The Hilti HDI-P TZ is the best-in-class anchor for applications requiring cracked concrete and seismic approval when minimal concrete embedment is allowed. Requiring just 3/4" of concrete embedment, this anchor is ideal for concrete slabs with post-tensioned cable. The HDI-P TZ anchor can be set with a hand setting tool and a hammer, or with a hammer drill and the auto setting tool. Using the auto setting tool with a Hilti hammer drill and the Hilti Dust Removal System (DRS), the installation of this anchor is virtually dust free, and provides an OSHA 1926.1153 Table 1 compliant. Make all of your post-installed anchor attachments in the ceiling cracked concrete compliant with the new HDI-P TZ.

  • 22V Cordless ACSR and Guy Wire Cutter
    Best-in-class cutting performance for ACSR (557 kcmil Eagle) & Guy Wire (3/8 EHS)....

  • Best-in-class cutting performance for ACSR (557 kcmil Eagle) & Guy Wire (3/8 EHS).  The new Hilti fixed jaw ACSR cutting tool, NCT 25-A22, is designed to help power and utility contractors cut aluminum conductor with steel re-enforcement safer than manual cutters with increased productivity. This lightweight ergonomically designed tool allows for increased productivity due to the automatic jaw retraction feature and the trigger design that allows for safe operation when wearing Class 2 or 4 protective gloves. The NCT 25-A22 is the only cutting tool on the market that offers the Hilti 20-2-1 warranty.
  • 22V Cordless Knockout Tool
    Extremely maneuverable, highly productive solution for making precise holes into electrical enclosures....

  • The Hilti NPU 100-A22 cordless knockout punch provides users with a highly productive solution for making precise holes in a variety of electrical enclosures. This tool allows for extreme maneuverability to reach into difficult applications where other tools struggle to reach. The Hilti NPU 100-A22 cordless knockout is a safer option over manually actuated hydraulic knockout tools and provides faster application performance over manual tools as well. This tool is backed by the industry leading Hilti 20-2-1 warranty.
  • ON!Track Smart Tag AI T380
    Bluetooth enabled tags save time and money by mapping lost tools and instantly checking inventory...

  • Introducing Hilti's ON!Track active tracking functionality enabled by new Bluetooth tags. Active tracking expands the ON!Track value proposition with increased software functionality and productivity savings. Use the last seen function when an item is lost or stolen. Instantly check inventory with just a click of a button. ON!Track is a robust tool tracking and asset management solution that gives complete clarity into what equipment and material you have, where it is, who is using it and when it needs maintenance. With this critical information at your fingertips, you can efficiently get your equipment where it needs to be — keeping your jobs on track, profitable and compliant.

Send Email

Type your information and click "Send Email" to send an email to this exhibitor. To return to the previous screen without saving, click "Reset".


For technical assistance with this webpage, please contact support


2019 SHOW DATES
Sunday, Sept. 15 - Tuesday, Sept. 17, 2019

2019 Exhibitor Website
Click Here

2019 LAS VEGAS
EXHIBITOR PROSPECTUS

Download Here

2019 LAS VEGAS
FLOORPLAN

View Here

2019 EXHIBITOR
CONTRACT

Download Here

2018 LOCATION
Pennsylvania Convention Center
1101 Arch St.
Philadelphia PA 19107

Move-in / Move-out & Shipping Info

Future Dates
2019: Las Vegas Sept. 14-17
2020: Chicago Oct. 3-6
2021: Nashville Oct. 9-12
2022: Austin Oct. 15 - 18
2023: Philadelphia Sept. 29 - Oct. 2
2024: San Diego Sept.28 - Oct. 1