American Polywater Corporation

Stillwater,  MN 
United States
  • Booth: 1131

Please stop by to see our new problem solving products.

Polywater FST and AFT 2-part, closed cell, foam duct sealants meet the NEC codes and or stop water and gasses from passing through conduits. New Polywater | Hauff-Technik mechanical conduit seals, sleeves and building entrance solutions will be on display. BonDuit Conduit Adhesive for connecting PE conduit to PVC, rigid steel and fiberglass. Cleaners for PPE tools and equipment, maintenance, and medium voltage splicing. Pull Planner 4.0 cable tension calculation software plans your cable pulls.

Brands: Polywater cable lubricants, FST foam duct sealant, SpliceMaster electrical cable and maintenance cleaners, InstaGrout transformer pad sealant, PowerPatch transformer repair kits. Polywater AFT, Polywater | Hauff-Technik.

 Show Stoppers

  • PGKD Modular Seal
    The only modular seal that visually lets you know when your seal is properly tightened. These are no loose parts. Offers stainless steel 316 hardware and is watertight up to 72.50 PSI...

  • “Did I install it correctly?”, is the most asked question when using a “Linkseal®” style product. The PGKD is the only product on the market that gives you a definitive answer along with confidence. Its unique integrated installation control visually indicates when the seal is secure. Crews, engineers, and owners get the added peace of mind and security that the PGKD has been installed properly. Gas, water, sewer, and electrical crews will appreciate having the nuts molded into the pressure plate, a design that greatly reduces the risk of lost parts.

    •  Integrated, visual installation control—no torque wrench required
    •  No retightening required
    •  Nuts molded into the pressure plates—no loose parts
    •  Gastight and watertight up to 72.50 PSI (5 bar)
    •  All metal parts made of high-quality stainless steel V4A (AISI 316L)
    •  Available in EPDM or NBR rubber

  • PHSI Double Wall Insert
    The Varia adjusts to length for setting in concrete. Creating a better pathway into buildings versus pour-in-place conduits, sleeves, or core drills which leave room for error....

  • Duct banks are designed to protect underground cabling and provide entrances into a structure. With few choices and limited permitting, it is important to consider which entrance best allows future expansion with minimal additional cost. For poured or cast structures, the PHSI-VARIA offers a new way to create gastight and watertight duct banks. This solution creates secure, sealed pathways now and into the future.

    VARIA modules
    Effortlessly create duct banks by locking modules together.
    Patented design easily secures to rebar or forms.
    Inner ribs direct concrete into place and, when cured, guard against water ingress.
    Clear cover provides protection against debris with a double-seal and improves site safety by allowing field crews to check for water in the duct before removal. PHSI sealing options are engineered to integrate with the bayonet locking mechanism on Varia and DFK entrances. This ensures proper alignment for a watertight and gastight seal. Every time. Sealing options: Interlocking heat and cold shrink seals connect cables from direct buried or open trough duct banks.
    PHSI-DG and PHSI-PHRD6 mechanical seals provide exceptional sealing and durability for single or multiple cables/pipes.
    The innovative Segmento modular system integrates with PHSI to manage newly installed cables. Match various cable sizes and configurations with three insert module choices for flexibility and field convenience. Change cable group combinations with ease. Unused openings are sealed and available for future use.

    Segmented ring technology allows the installer to custom fit cables in the field. UL listed and suitable for use in Hazardous Locations: Class I, Division 2 per NEC 501.10(B)(4)....

  • Readily respond to an outage or change in sealing needs with the PHRD-SG. These seals provide end users with a stock solution which can be customized in the field to fit your cable ODs. Peel back and remove the segments to fit the cable and install. No need to wait for a custom seal. The PHRD-SGi offers the added flexibility of modifying the OD of the seal in the field to accommodate the inside diameters of both schedule 80 and 40 PVC conduit. An optimal solution for sealing conduits to meet NEC and NESC codes. Mechanical seals are an excellent option in environments with post installation movement, vibration, high water pressure or if negative pressure must be maintaine

    • Individual adjustment to cable diameters on site
    • Segmented ring technology
    • Durable materials stand up to corrosive environments and rodent infestation
    • Split seal for retrofit installation
    • 10-year warranty
    • Gastight and watertight up to 36 psi
    • Solid 0.197 inch (5 mm) stainless-steel press plate
    • EPDM rubber

Send Email

Type your information and click "Send Email" to send an email to this exhibitor. To return to the previous screen without saving, click "Reset".

For Technical Support with this webpage, please contact support

NECA 2021 Nashville
Sun. Oct. 10 - Tues. Oct. 12, 2021 
Music City Convention Center - Nashville

Show Hours:
Sunday, Oct. 10:  11:30am - 5:00pm
Monday, Oct. 11:  11:30am - 4:00pm
Tuesday, Oct. 12:  9:00am - 1:00pm

Virtual Show Hours:
Mon. Oct. 11: 11:30am - 4:30pm CT
Tues. Oct. 12: 11:30am - 4:30pm
Wed. Oct. 13: 9:00am - 1:00pm

Future Dates
2022: Austin: Oct. 15 - 18
2023: Philadelphia: Sept. 30 - Oct. 3
2024: San Diego: Sept.28 - Oct. 1
2025: Chicago: Sept. 12-14