DEWALT

Deliver powerful 4’’ punches in 10-gauge mild and 12-gauge stainless steel with the NEW DEWALT 20V MAX* Knockout Tool. This hydraulic power tool introduces the first of a kind, patented magnetic die Quick Connect System to allow users to easily set up the punch without the weight of the tool. Punches 1 ½’’ and larger slide onto the Draw Stud and are secured via the Quick Stud Lock, eliminating the need to thread punches onto the Draw Stud. The tool's inline body, along with its 360-degree rotatable detent head, gives users the maximum flexibility to execute punches in tough-to-reach applications.

Transform your impact driver into a fast and powerful PVC Conduit Cutter with the DEWALT® IMPACT CONNECT™ PVC Cutter Attachment. Cut up to 6X faster* and avoid the hassle of hand tools with this quick-change attachment that leverages the power and torque of your existing impact driver. The revolutionary Quick-Change Brace System attaches in seconds and allows you to seamlessly switch between cutting pipe and driving screws without any additional interruptions. Send your productivity into overdrive with IMPACT CONNECT™ products that are designed to work with select DEWALT or other select pro-grade 18V or 20V Impact Drivers†.

Perform robust crimps with the new DEWALT 20V MAX* Inline Crimper. The lightweight hydraulic power tool has the capacity to crimp #8 – 600 MCM Cu and #8 – 350 MCM Dual Rated connectors. The 180° pivoting head, manual release trigger, and bright LED lights give users the ability to maneuver the tool into tight spaces, while also providing complete control over the crimping cycle to ensure an accurate crimp. When used with the NEW DEWALT Copper or Aluminum U-Style Dies (kits sold separately), the inline crimper produces UL classified crimps with connectors from leading manufacturers. 

The DEWALT Tool Connect QR Code adhesive tags DCE051 (Large) and DCE052 (Small) for use with the Site Manager app make asset management easy. The QR Code tags can be attached to a variety of assets for easy assignment of those assets to people or places with the Site manager app.  The tags strong adhesion and durable materials withstand tough jobsite conditions and are designed to be weather, scratch and UV resistant. 

LENOX Snap-Back® Quick Change Arbors offer a tool-free solution for changing out hole saws. End users no longer need an allen-key to change out the pilot drill bit. The quick-change pilot bit is compatiable with all Snap-Back arbors as well as standard arbors. Snap-Back® Arbors feature a universal fit as no adaptors are needed to thread onto the hole saw and are designed to prevent the hole saw from locking up onto the hole saw during use. Snap-Back® Arbors are durable enough to withstand both commercial and residential applications. 

With up to 50% longer life*, industrial pros can lead the pack with WAVE EDGE™ Bi-Metal Reciprocating Saw Blades to tackle more work before needing a replacement blade.This high performance saw blade was made for fast, efficient cutting with groundbreaking WAVE EDGE™ technology designed to enhance cutting life and blade endurance. Perform quick, clean plunge cuts with ease thanks to the blade’s high-speed cutting edge and spring steel backing that assists in strengthening the blade to reduce breaks and unplanned work stoppages. WAVE EDGE is avaiable on select models of LENOX METALWOLF, MULTIWOLF & DEMOWOLF reciprocating saw blades.  

*versus prior LENOX generation.

The DEWALT Critical Connection Undercut (CCU+™) anchor is a post‐installed structural anchor designed for static, dynamic and seismic loading in the tension zone of both cracked and uncracked concrete. The high capacity CCU+ anchor can be loaded immediately following installation and is available in zinc plated ASTM A36 (F1554 Grade 36) mild carbon steel and ASTM A193 Grade B7 high strength carbon steel. For exterior applications or where high corrosion resistance is required, the CCU+ is also available in ASTM A193 Grade 8BM, Class 2 high strength 316 stainless steel. CCU+ anchors are installed into a fixed depth hole with a cone‐shaped cavity at the bottom which is created in a secondary drilling operation using a specialty undercut drill bit supplied by DEWALT. The result is bottom‐bearing post‐installed anchor which keys into the base material with minimal expansive forces allowing for close edge distance and anchor spacing, similar to a cast‐in‐place headed stud. The heavy‐wall expansion sleeve contributes to load transfer and improved shear capacities particularly for the thrubolt version.

Designed to help you complete demanding fastening and drilling projects, this 20V MAX* XR® Brushless 1/2 in. Hammer Drill/Driver delivers the durability and performance professionals need on jobsite. Quickly drive fasteners into thick material with its powerful brushless motor, which outputs up to 40% more Unit Watts Out compared to DCD796B using DCB205 battery or DCBP034 DEWALT POWERSTACK™ battery (sold separately)**. Speed through masonry drilling applications with up to 34,000 bpm thanks to an integrated hammer mode function. This lightweight, well-balanced Hammer Drill/Driver was built compact to help users comfortably work in tight spaces for extended periods of time. The 3-position, pivoting LED is designed to enhance visibility in dimly lit work areas with its 3 mode settings and up to 70 Lumens of brightness.

Built to help prevent tool failure due to lost power, this 20V MAX* Brushless Cordless 2 in. Magnetic Drill Press with FLEXVOLT ADVANTAGE™ securely attaches to ¼ in. and thicker metal by using a permanent magnet base that requires no electrical charge. The Quick-Change Chuck system allows for tool free change between ¾ in. Weldon Shand and ½ in. keyed chuck (included). For ultimate user control, the E-Clutch is designed to turn off the drill when it detects rotation, part of the PERFORM & PROTECT™ family. The drill has 10 speed settings to allow for a variety of applications.